Ricatech RMC250 Operations Instructions download pdf (Page 5)

3. Press PRESET + / or PRESET – / to allocate a number from 1 to 20 stations.

4. Press PROGRAM /

to confirm, display shows the preset number waveband and the frequency of the preset station.

5. Repeat steps 1-4 to store other stations to listen to a preset station. Press PRESET + /

or PRESET – /

once or

more until the desired preset station in displayed.

To listen to a preset station

Press PRESET + /

or PRESET – /

once or more until the desired preset station in displayed.

Automatic programming radio stations

Automatic programming will station preset 1, from this preset number upwards, former programmed tuner stations will be erased.

1. Press and hold PROGRAM /

button until Auto appears

- Icon “ memory” will start flashing

- Available stations are programmed

- After all stations are stored, the last preset station will then be played

ANTENNA

Antenna: for FM reception, the unit is provided with a FM WIRE ANTENNA, move the wire until the reception is clear and

with no interferences. For AM reception, the unit is provided with a directional build-in ferrite antenna. Rotate the set to find

the position in which the best reception is obtained. Do not connect the EXTERNAL FM ANTENNA to any outside antenna.

CASSETTE OPERATION

1. Press the FUNCTION /

to set the unit to PHONO mode.

2. While in Phono mode, insert a prerecorded tape through the CASSETTE DOOR.

3. Adjust the volume level by turning the VOLUME DOWN/UP KNOB /

4. For fast forwarding, press the EJECT/F.F. half way in. Pressing again, will stop the fast forwarding and return the

cassette to the playing mode.

5. To stop and eject the cassette, press the EJECT/F.F. in completely.

6. When one side of the tape finishes playing, the cassette will automatically stop.

Note: 1.Remove the tape from the unit when it is not in use or stopped.

2.Phono function discontact automatically with cassette in use.

USB & SD-CARD OPERATION

USB operation:

1. Press the FUNCTION /

to set the unit to USB mode.

2. Plug-in USB mass storage device. READ is displayed as the system scans the contents of USB device.

3. Track no. 1 of root folder (Folder 1) will be playback automatically after finish reading USB device contents.

4. Press FF /

or FB / once or repeatedly until the desired track number appears in display.

5. Press PRESET + /

or PRESET – /

to select desired album.

6. Press STOP/BAND /

to stop playback.

SD-Card operation:

1. Press the FUNCTION /

to set the unit to CARD mode.

2. Insert SD-Card into the card slot. “READ” is displayed as the system scans the contents of SD card.

ENGLISH

FUNCIÓN SLEEP

Puede ajustar el periodo de tiempo antes de que la unidad entre en modo Standby de forma automática.

En el mando, pulse SLEEP /

repetidamente para seleccionar el periodo de tiempo (en minutos):

-En la pantalla aparecerá la secuencia: SLEEP 90, 80, 70, 60, 50, 40, 30, 20, 10

-En la pantalla aparecerá brevemente la opción seleccionada y volverá al estado anterior.

Para desactivar, pulse SLEEP / de nuevo para volver a “00” o pulse POWER / para que la unidad entre en modo

Standby.

CONTROL DEL VOLUMEN

Pulse VOLUME UP /

/ VOLUME DOWN / en el mando para ajustar el volumen.

FUNCIÓN MUTE

Puede desconectar de forma temporal el sonido sin tener que apagar la unidad.

1. Pulse MUTE /

en el mando a distancia para desactivar el sonido,

la reproducción continuará sin sonido.

2. Para activar el sonido puede:

- pulsar MUTE /

de nuevo;

- ajustar los controles de volumen;

- cambiar la fuente

Pulse EQ /

en el mando a distancia para seleccionar el modo de EQ que desee.

Hay 5 modos de EQ:

RADIO

Sintonización de AM/FM

1. Pulse FUNCTION /

para ajustar la unidad en modo TUNER (radio).

2. Pulse STOP/BAND /

para seleccionar la banda que desee: FM o MW

3. Sintonización automática – Mantenga pulsado FF / or FB / hasta que la se encuentre una emisora que se

escuche de forma correcta. Si se recibe una emisora en estéreo, aparecerá (ST). Repita el paso 3 si es necesario

hasta que encuentre la emisora que desea,

4. Sintonización manual - Pulse FF /

or FB / brevemente y de forma repetida hasta encontrar una emisora.

Memorización de emisoras de radio

Puede almacenar hasta un total de 40 emisoras de radio (FM y MW) en la memoria, de forma manual o automática.

1. Sintonice la emisora que desee.

2. Pulse PROGRAM /

para activar la memorización, parpadearán el icono "MEMORY” y P01.

ESPAÑOL

1 2 3 4 5 6 7 8 9 10 ... 28 29

Comments to this Manuals

No comments

Ricatech RMC250 Operations Instructions Page 5

Comments to this Manuals

Related products and manuals for Audio turntables Ricatech RMC250